Yesterday, two customized underpad production lines of our company simultaneously started debugging operations, and client representatives from the cooperative party made a special trip to the factory for an on-site inspection. Under the client’s full witness, our engineers, with their professional and exquisite technology, pushed the production lines to a maximum operating speed of 450 pieces per minute and completed multiple rounds of intensive debugging tests. Each round of testing produced more than 20,000 finished products, and after strict inspection, the qualification rate of finished products remained stably above 98.7%, winning high recognition from the client with solid strength.
At the debugging site, the two care pad production lines operated at high speed. The entire process, including raw material conveying, compression molding, cutting and slitting, and finished product output, was completed in one smooth flow, making the precision and stability of mechanical operation clearly visible. To fully verify the extreme performance and adaptability of the production lines, the engineering team repeatedly switched operating parameters and conducted continuous tests under the maximum speed condition - every link was carefully monitored, from raw material adaptability and equipment linkage coordination to finished product size accuracy and liquid absorption performance indicators. After each round of testing, the technical personnel immediately conducted random inspections on the finished products and recorded various data indicators to ensure that the debugging effect was traceable and optimizable. In multiple rounds of testing, the output of more than 20,000 pieces per round and the qualification rate above 98.7% not only demonstrated the high-efficiency production capacity of the production lines but also confirmed the stable reliability of the equipment in large-scale production scenarios.
It is worth mentioning that the 98.7% qualification rate is not our final goal. Upholding the technical concept of "striving for perfection and pursuing excellence", the team has long set the qualification standard at 99.5%. During the debugging process, the engineers remained focused and meticulous throughout, carrying a record book with them to capture subtle problems that occurred in each round of testing in real time - whether it was the occasional edge cutting deviation or the slight fluctuation in the compression tightness of a very small number of finished products, all were accurately recorded. During the intervals between tests, the technical team held an impromptu communication meeting immediately, synchronized the problems to the design department, and the two parties jointly discussed optimization plans and formulated targeted adjustment measures to ensure that every detailed defect could be responded to quickly and resolved properly. This closed-loop working mode of "identifying problems - feedback and communication - optimization and improvement" made the client truly feel our ultimate pursuit of product quality.
The client representatives observed the entire process of debugging tests and problem handling, and highly praised the professional quality and rigorous attitude of our engineers as well as the excellent performance of the production lines. "From the stability of the equipment's high-speed operation to the detailed records of each round of testing, and then to the efficiency of rapid problem response, every link of your work is full of professionalism and care," the client representative sincerely praised. "The 98.7% qualification rate has already exceeded our expectations, and we admire your spirit of not being satisfied with the status quo and pursuing the 99.5% goal even more. There is no doubt that WOMENG is the most satisfactory company we have ever cooperated with, and we have full confidence in the finally delivered production lines!"
The smooth progress of this debugging test and the high recognition from the client not only serve as a strong verification of the technical strength of the company's care pad production lines but also strengthen the confidence of both parties in deepening cooperation. In the next step, the engineering team will, based on the problem list recorded during debugging, work with the design department to complete targeted optimizations, make every effort to achieve the 99.5% qualification rate goal, and ensure that each piece of equipment delivered to the client reaches the optimal performance. In the future, the company will continue to focus on technological innovation and be customer demand-oriented, providing more efficient, stable, and high-quality automated production equipment and solutions for global clients, and continuing to write a new chapter of win-win cooperation with strength.
Your message must be between 20-3,000 characters!
